Is it raining now in Pimpri-Chinchwad?
Sunny
25 AugNo upcoming precipitation for the next hour.
Last update: 04:30, 25 Aug 2026
Free to download * Essential from $0.83 * Prices vary by region and promotions.
- App Only
Track up to 20 locations
Home, office, kids' school - all at once, no switching tabs.
- App Only
Alerts for each of them
Get notified 15 minutes before rain - while you can still change your plans.
- App Only
Widgets on your home screen
Live radar without opening the app - on your lock screen or home screen.
Rain in Pimpri-Chinchwad: What You Need to Know
Pimpri-Chinchwad weather carries high year-to-year swing built into the Deccan Plateau climate — the ~722 mm annual average can tip toward drought or flood almost overnight, as it did when the Pawana Dam catchment took 426 mm of rain in 24 hours in a single documented event. A hyperlocal radar is what actually shows a Ravet resident whether that kind of burst is building over the Pavana right now.
Three rivers cross the city — the Pavana, Indrayani and Mula — with the Pavana and Mula both originating in the Sahyadri hills and running 20 km through the urban-industrial landscape before reaching Pimpri-Chinchwad. That means an orographic burst over the Sahyadris, well outside the city, can drive downstream river flooding here independent of local rainfall, and dense industrial development along the Pavana and Mula riparian zones concentrates the exposure in low-lying riverside settlements.
RainViewer pulls its India Meteorological Department (IMD) radar feed into a live map updated every 5 minutes, tracking cells across the city and the Sahyadri catchment feeding the Pavana and Mula. What a single annual average can't show is whether the cell over the hills has already reached Ravet — the live map does.
Rain by Season in Pimpri-Chinchwad
Southwest Monsoon (June–September)
Pimpri-Chinchwad's monsoon runs June through September and is the primary driver of the ~722 mm annual average, though year-to-year variability is high enough to swing toward either drought or flood. This is the window when the Ravet, Punawale and Tathawade underpasses on the Mumbai–Bengaluru Highway face their highest risk of closure from waterlogging.
Pre-Monsoon Water Stress (March–May)
Before the monsoon arrives, Pawana Dam storage has fallen as low as 16%, triggering mandated water cuts of up to 15% in the recent past. This scarcity-to-flood swing — storage jumped from 27.62% to 55.07% after a single 426 mm/24-hour event — makes the pre-monsoon transition the most consequential season for the city's water planning.
Dry Season (October–May)
Outside the June–September monsoon, Pimpri-Chinchwad runs dry, and the Pavana, Indrayani and Mula rivers sit well within their banks. Pre-monsoon water restrictions tied to reservoir depletion are the main disruption during this stretch, rather than flood risk.
Why You Need a Rain Radar in Pimpri-Chinchwad
Bajaj Auto and Tata Motors factory workers
Known as "The Detroit of India," Pimpri-Chinchwad hosts major factories for Bajaj Auto, Tata Motors, Mercedes-Benz, Force Motors and Kinetic Engineering. Shift workers checking the radar before a commute can see whether a Sahyadri-fed cell is likely to flood the Mumbai–Bengaluru Highway underpasses before clocking in.
Ravet, Punawale and Tathawade commuters
The Ravet, Punawale and Tathawade underpasses on the Mumbai–Bengaluru Highway have been forced to close repeatedly from heavy waterlogging, and a Pavana river barrage overflow at Ravet has sent floodwater into houses in nearby Akurdi. Checking the radar 20–30 minutes before driving through these named underpasses shows whether they're likely to be passable.
MIDC Pimpri Chinchwad logistics operators
MIDC's internal road network totals 80.13 km of asphalted multi-lane roads built to carry truck and container traffic for automobile, engineering and pharmaceutical units, including Hindustan Antibiotics Limited. Logistics operators checking the radar before dispatching a truck can see whether monsoon waterlogging is likely to disrupt the route.
Chinchwad's Morya Gosavi Temple visitors
The historic Morya Gosavi Temple in Chinchwad was partially submerged when floodwater entered the premises during a major rain event. Visitors and devotees checking the radar before a temple visit during monsoon season can see whether a cell is building over the Pavana.
Riverside residents near the Pavana and Mula
PCMC has evacuated as many as 110 families from low-lying riverside areas during a single incessant-rain flooding episode, with power cut in several divisions after floodwater entered switching stations. Checking the radar over the Sahyadri catchment upstream, not just the local sky, gives riverside residents real lead time.
RainViewer Radar Coverage in Pimpri-Chinchwad
RainViewer draws radar data for India from the India Meteorological Department (IMD) via mausam.imd.gov.in, updated every 5 minutes. Coverage is strongest across the Gangetic Plain, western coast, and major cities; sparser in the Himalayan foothills and remote northeast. The same composite covers the Sahyadri catchments feeding the Pavana and Mula rivers, plus neighboring Pune, sharing the same radar picture across the twin-city industrial belt.
Pimpri-Chinchwad Rain Radar: Frequently Asked Questions
- Is it raining in Pimpri-Chinchwad right now?
The only accurate answer is a live radar, because the Pavana and Mula rivers can rise from rain falling in the Sahyadri hills, well outside the city itself. A hyperlocal radar reading shows both the local cell and the upstream Sahyadri catchment, pulling India Meteorological Department (IMD) data that RainViewer refreshes every 5 minutes.
- Should I visit Chinchwad's Morya Gosavi Temple today?
A Morya Gosavi Temple visit is safe to plan around a live radar check, since the temple was partially submerged in a past major rain event tied to Pavana river flooding. Checking the radar over both the local sky and the Sahyadri catchment upstream before setting out beats a single seasonal rainfall figure.
- Does rain affect the Ravet, Punawale and Tathawade underpasses?
These three underpasses on the Mumbai–Bengaluru Highway have been forced to close repeatedly from heavy waterlogging during monsoon season, sometimes even before Sahyadri-fed river levels visibly rise. Checking the radar 20–30 minutes before driving this stretch shows whether the underpasses are likely to be passable or worth rerouting around.
- Does Pimpri-Chinchwad flood when it rains?
A Pavana river barrage overflow at Ravet has sent floodwater into houses in nearby Akurdi, and PCMC has evacuated up to 110 families from low-lying riverside areas during a single event. Avoid the Ravet, Punawale and Tathawade underpasses and riverside settlements during heavy rain, and check the radar rather than relying on local sky conditions alone.
- When is the best time to visit Pimpri-Chinchwad to avoid rain?
October through May is the dry season, when the Pavana, Indrayani and Mula rivers sit well within their banks and the Mumbai–Bengaluru Highway underpasses stay clear. Visiting during the June–September monsoon still works, but checking the radar over both the city and the Sahyadri hills before a riverside trip avoids a sudden orographic burst.
- Why can Pimpri-Chinchwad flood even when local rain looks light?
The Pavana and Mula rivers both originate in the Sahyadri hills and run 20 km through the urban-industrial landscape, so an orographic burst there — like the documented 426 mm in 24 hours over the Pawana Dam catchment — can drive downstream flooding independent of local rainfall. Dense industrial development along the riparian zones concentrates that exposure in low-lying riverside settlements, a risk a city-only forecast misses.
- How often does the Pimpri-Chinchwad rain radar update?
RainViewer's hyperlocal radar for Pimpri-Chinchwad updates every 5 minutes, drawing on India Meteorological Department (IMD) data via mausam.imd.gov.in. That refresh rate is fast enough to catch a Sahyadri-fed cell before it reaches the Pavana at Ravet.
- Can I get a warning before rain hits Pimpri-Chinchwad?
Setting a rain alert for a specific point, such as the Ravet underpass or a home near the Pavana riverbank, gives warning before a cell arrives instead of after. RainViewer fires that alert automatically once the radar detects the cell approaching, enough lead time to reroute around an underpass or move away from the river.
Track Rain in Pimpri-Chinchwad in Real Time
Every monsoon, the Ravet, Punawale and Tathawade underpasses on the Mumbai–Bengaluru Highway can close within an hour of a Sahyadri-fed cell reaching the Pavana.
Pimpri-Chinchwad's flood risk starts in the Sahyadri hills, well before it reaches "The Detroit of India's" factory floor or the highway underpasses. Only a live map covering both catches the timing.
Your weather app says a chance of rain for Pimpri-Chinchwad this afternoon. RainViewer shows a heavier cell building over the Sahyadri hills, with the Pavana at Ravet likely to rise within the hour.
Track rain in Pimpri-Chinchwad — free Upgrade to Essential for alerts, forecasts, and full radar history
2-hour forecast in 5-minute slices
RainViewer's 2-hour forecast in 5-minute slices shows exactly when a Sahyadri cell is likely to reach the Ravet underpass, in far finer steps than an hourly forecast.
Rain alerts before arrival
Set a rain alert for the Ravet underpass or a home near the Pavana riverbank, and RainViewer fires it before the cell arrives, not after.
Direction arrows on the map
Direction arrows show whether an incoming cell is tracking in from the Sahyadri hills to the west, the direction that feeds Pimpri-Chinchwad's flood risk.
48 hours of radar history
48 hours of radar history shows how the last Pavana-triggering burst actually tracked from the hills to the underpasses.
Multiple locations
Track the Ravet underpass, a Bajaj Auto shift commute, and a home near the Pavana riverbank at the same time, each with its own alert.
RainViewer
