Is it raining now in Shapar?
Sunny
15 AugNo upcoming precipitation for the next hour.
Last update: 11:30, 15 Aug 2026
Free to download * Essential from $0.83 * Prices vary by region and promotions.
- App Only
Track up to 20 locations
Home, office, kids' school - all at once, no switching tabs.
- App Only
Alerts for each of them
Get notified 15 minutes before rain - while you can still change your plans.
- App Only
Widgets on your home screen
Live radar without opening the app - on your lock screen or home screen.
Rain in Shapar: What You Need to Know
Shapar weather follows the semi-arid Kathiawar pattern typical of the Rajkot area: hot summers, cool winters, and a rainy season running mid-June to September that delivers an intermediate 675mm a year, with the Rajkot area seeing high year-to-year variability, drought in some years, flooding in others. A hyperlocal radar for Shapar matters because the coastal Saurashtra region shows a statistically significant increasing monsoon rainfall trend, with the nearby Veraval station recording a rise of 44.3mm per decade between 1901 and 2014, meaning intense rain years are becoming more likely rather than less.
The mechanism is that same variability landing on a dense industrial zone. Rajkot-area monsoon rainfall "can cause severe floods" in intense years, and Rajkot lies in the path of tropical cyclones, with pre-monsoon and post-monsoon intensity peaks. No named flood event or drainage system specific to Shapar-Veraval has been documented, but the industrial density here means a standard Rajkot-district forecast cannot show whether a heavy cell is settling directly over the GIDC's casting sheds or passing north toward the city.
RainViewer draws its Shapar feed from the India Meteorological Department (IMD), refreshed every 5 minutes, so the map reflects new radar scans rather than a forecast written hours earlier. Manufacturing units in Shapar-Veraval sit directly along NH8-B, the Gondal highway, and NH27, the key transport arteries for the casting and engineering export trade. What the live map reveals and a forecast cannot: whether a cell building over the Saurashtra coast is heading inland toward the GIDC or staying offshore.
Rain by Season in Shapar
Monsoon season (mid-June–September)
The core rainy season for Shapar, delivering most of the Rajkot area's 675mm annual average, with intense years capable of "severe floods" per regional climate sources.
Cyclone risk windows (late April–early June and October–November)
These two windows bracket the monsoon and carry Rajkot's pre- and post-monsoon cyclone intensity peaks, a district-level risk that adds to the monsoon's own variability.
Dry season (October–mid-June)
The default climate for most of the year, including extreme summer heat reaching 45°C in Rajkot before monsoon onset.
Why You Need a Rain Radar in Shapar
Investment casting cluster workers
Shapar-Veraval's investment casting cluster alone produces about 160 tonnes a day, roughly 48,000 tonnes a year, and employs about 10,000 direct workers with a turnover of around Rs 1,000 crore a year. A shift supervisor checking the radar before heavy monsoon rain can plan outdoor material movement around a cell.
Plastics, packaging, and auto-parts manufacturers
Shapar-Veraval GIDC is the industrial heart of Rajkot, hosting plastics and packaging, auto parts, engineering, bearings, brass parts, and kitchenware manufacturing. Checking the radar before a monsoon-season shift helps plant managers protect outdoor stock and loading operations.
Freight movement on NH8-B and NH27
Manufacturing units in Shapar-Veraval sit directly along NH8-B (the Gondal highway) and NH27, the key arteries for the casting and engineering export trade. A dispatcher checking the radar before a monsoon-season run can see whether a cell is building along either route.
Facility managers during intense monsoon years
Rajkot-area monsoon rainfall "can cause severe floods" in intense years, and Rajkot also lies in the path of tropical cyclones with pre- and post-monsoon peaks. A GIDC facility manager watching the radar during these windows can decide whether to pause outdoor operations before a serious spell arrives.
Business visitors and buyers touring the GIDC
Rajkot hosts over 23,000 industries across 15 industrial estates, including Shapar, within a 25km zone, drawing a steady flow of business visitors and buyers to the casting and engineering export cluster. Checking the radar before a factory visit during the monsoon shows whether rain is likely to disrupt the trip.
RainViewer Radar Coverage in Shapar
RainViewer draws radar data for India from the India Meteorological Department (IMD) via mausam.imd.gov.in, updated every 5 minutes. Coverage is strongest across the Gangetic Plain, western coast, and major cities; sparser in the Himalayan foothills and remote northeast. Shapar-Veraval sits within Rajkot's industrial belt alongside Aji GIDC and Metoda, with the coastal Saurashtra town of Veraval to the south, so rain building along the coast is visible before it moves inland toward the GIDC.
Shapar Rain Radar: Frequently Asked Questions
- Is it raining in Shapar right now?
The fastest way to know is a live hyperlocal radar, since Rajkot-area monsoon rainfall can swing from drought to severe flooding year to year, and coastal Saurashtra's rainfall trend has been rising for over a century. RainViewer pulls fresh India Meteorological Department (IMD) radar scans every 5 minutes, so the map reflects what is happening right now rather than a forecast written hours earlier.
- Should I plan a factory visit to Shapar-Veraval during monsoon season?
The GIDC's casting and engineering plants operate through the mid-June to September monsoon, but Rajkot-area rain can turn severe in intense years. Checking the radar before a visit during this window is worth more than a general Rajkot forecast.
- Does rain affect freight on NH8-B and NH27 near Shapar?
Manufacturing units in Shapar-Veraval sit directly along NH8-B (the Gondal highway) and NH27, the main export arteries for the casting and engineering trade. Checking the radar before a monsoon-season run on either road shows whether a cell is passing through or settling in for hours.
- Does Shapar flood when it rains?
Rajkot-area monsoon rainfall "can cause severe floods" in intense years, and Rajkot also lies in the path of tropical cyclones with pre- and post-monsoon intensity peaks, though no named flood event or drainage system specific to Shapar-Veraval has been documented. Facility managers should treat the mid-June to September window, plus the cyclone risk windows on either side, as the periods to track most closely.
- When is the best time to visit Shapar to avoid heavy rain?
December through February sits outside both the mid-June to September monsoon and the cyclone risk windows in late April–early June and October–November, making it the most predictable stretch for visiting the GIDC. April through early June brings extreme heat up to 45°C on top of the early cyclone risk window, so it is worth avoiding for outdoor factory visits.
- Why is Shapar's monsoon rainfall getting harder to predict?
The nearby Veraval station has recorded a statistically significant increase in monsoon rainfall of 44.3mm per decade between 1901 and 2014, showing that coastal Saurashtra's rain is intensifying over time, not staying flat. Combined with Rajkot's own high year-to-year variability, drought in some years and flooding in others, that trend is why a live radar matters more for Shapar-Veraval now than a historical seasonal average would suggest.
- Is there a live rain radar for Shapar?
Yes — RainViewer's hyperlocal radar for Shapar draws directly from the India Meteorological Department (IMD), refreshing every 5 minutes with new scans instead of a periodic forecast update. The map covers the wider Rajkot industrial belt, so a cell moving in from the Saurashtra coast near Veraval is visible before it reaches the Shapar-Veraval GIDC.
- Can I get a warning before rain hits the Shapar-Veraval GIDC?
Yes — RainViewer's rain alerts can be set for a specific point like the GIDC or the NH8-B corridor, so plant managers and dispatchers get a notification as a cell approaches instead of checking the map manually. That advance window is what lets a facility manager decide whether to pause outdoor operations before rain arrives.
Track Rain in Shapar in Real Time
Investment casting cluster workers and the plastics, auto-parts, and engineering manufacturers of Shapar-Veraval GIDC both depend on knowing what a Rajkot-area monsoon cell is about to do. In intense years, this region's rainfall "can cause severe floods," and the coastal Saurashtra rainfall trend has been climbing for over a century.
A generic forecast says scattered showers for the Rajkot area this week. RainViewer's live hyperlocal radar shows a cell building off the Saurashtra coast near Veraval before it ever reaches the Shapar-Veraval GIDC — that is the call a facility manager makes every time a monsoon or cyclone-window cell forms.
Track rain in Shapar — free Upgrade to Essential for alerts, forecasts, and full radar history
2-hour forecast in 5-minute slices
See whether a cell over the GIDC stays light or builds into the kind of spell that can turn severe in an intense monsoon year.
Rain alerts before arrival
Set an alert for the Shapar-Veraval GIDC and get notified before a system reaches the plants.
Direction arrows on the map
See whether a cell is moving in from the coast near Veraval toward Shapar-Veraval or staying offshore.
48 hours of radar history
Review the last 48 hours to see how fast a monsoon or cyclone-window cell built before it reached Rajkot's industrial belt.
Multiple locations
Track the Shapar-Veraval GIDC, NH8-B, and the coastal Veraval area at the same time.
RainViewer
